Fantastic 'WEDGE LOCK' security...
 
Grips fabrics, polythene, netting and board!

- No tools needed
- Instant "grip" up to 110 kg!
- The heavier the load - the greater the grip.
- Reusable / Relocate as required
- Apply with one hand operation
- Takes thick fabrics / up to 6mm
                                                                                              
Holdon™ Maxi

Supplied with the sleeve and wedge separated, it is easily
assembled during application (this also applies to the Mini).
The Maxi is a general purpose heavy duty clip. With a median loading capacity of 110 kg, the Maxi is used with confidence on applications where gripping efficiency is the prime consideration. See [Technical Specification] for an explanation of the term
'median loading'. The Maxi is ideal for customising shelters / covers and for emergency repairs to covers and tarpaulins.
(It has a groove in the sleeve specifically to capture the
reinforcing cord of tarpaulins).

Holdon™ Midi *

The Midi is a great new product designed specifically to grip as effectively as the Maxi but with multiple added benefits – lower cost, comes ready assembled, quick release feature, grips up
to 6mm thick fabrics and is of attractive appearance.  Its ideal
for retail sales. It does everything the Maxi does and more! Its performance and appearance makes it perfect for heavy duty sign/banner mounting, camping, marine use, general DIY, horticulture applications and stage / TV events.

Mini Holdon™

The smaller, lower cost Mini is designed specifically for the
sign and banner maker to provide a viable alternative to the traditional eyelet. Uses also extend to the retail camping
sector (pre-pack), gardening and horticulture applications
and various stage / TV events.

 
 
Holdon™ Technical specification.

 The heavier the load - the greater the grip!
 
OUTDOOR EVENTS – THEATRE – FILM

The Holdon™ helps meet that deadline...

- Backdrops!
- Cycloramas!
- Temporary projection screens!
- Banners!
- Temporary curtains!

If you need to stretch, secure or hang different
types of fabrics, there’s help at hand. No more improvising
with bits of timber or 'make do' fixings –The Holdon's instant,
reusable and relocatable eyelet clip will help you meet that
deadline.

Holdon™ clips make an amazing instant fixing point
in seconds – each clip will hold up to 110 kgs.                     Above:  Holdon™ is ideal to secure backdrops,
                                                                                                                                                        tents and banners.
                                                                                                                                                          
Imagine being able to apply multiple fixing points
onto cycloramas or backdrops (without puncturing
the fabric) in a matter of minutes without tools or special skills.
Just clip on a Holdon and you have a massively strong fixing
point in seconds – and if it’s not in quite the right place,
just push the release bar and relocate it!

Holdon™ is ideal on virtually all fabrics, including synthetics, velours, muslins and scrim.

SIGNMAKERS: REDUCE YOUR COSTS!

Holdon™ instant clip-on eyelets eliminate the need


for hems and traditional eyelets! Perfect for the
digital signmaker or to simplify banner mounting.

FAQs at bottom of page!

Holdons fit in an instant, without tools and enhance
the finished banner!

- Potential to eliminate hems and traditional eyelets!
- Signmaker prints the banner and supplies Holdons!               Above: The Holdon™ Mini is ideal to secure
- Total control over positioning!                                                  banners.
- Great holding power on most substrates!
- Reusable!

 
FAQ's: WHY HOLDON™ ?
 

Question – Why can't we carry on using the old tried and
tested eyelets?

Answer – With traditional banner printing methods, many
banner makers used blank banners with eyelets already
installed. When a switch is made to digital printing, the
printing equipment cannot accept banner fabric with eyelets.
The solution is to contract out the traditional eyelet process,
fit them manually (or by an auto setting machine), or adopt
the modern hassle free solution - provide the banner end
user with a handful of Holdons.

Question - Do you still need the hem on banners if you use Holdons?

Answer - Often not, because Holdons do not puncture the
fabric and the gripping area is spread. Installing an eyelet
actually weakens the area where it's installed. The performance with traditional eyelets on non-hemmed material is generally unsatisfactory. Do a comparative test yourself.

Question – We use traditional printing methods of printing banners, can we still benefit from using Holdons?

Answer – Holdons may not always be the best answer, but
there will be many occasions when Holdons will be more
convenient and perform better than traditional methods.
The Holdon™ for example, is great on large format banners
where the positioning and the number of fixing points is particularly critical.

Question – How strong are they?

Answer – The body of the Mini is load tested to 45 kgs and
the Maxi 100 kgs.




 



 
Question – How much grip do they have?

Answer – The holding efficiency is tested on 650/700 coated
vinyl fabric. The Mini holds to a minimum loading capacity of 45kgs and the Maxi, 100 Kgs. This may vary slightly from
fabric to fabric.

Question – Will the standard Mini and Maxi grip all fabrics with
the same efficiency?

Answer – For practical purposes yes, with the exception of when they are being used on polyester or other 'hard' fabric. The
Holdon™ on these fabrics needs the 'friction insert' provided with
each Mini – this ensures exceptional griping efficiency.

Question – Will they tear the fabric in extreme conditions?

Answer – This very much depends on the quality of the fabric. However, our experience is that the stress on the fabric when
using a Holdon is considerably less than with traditional eyelets. When used on exceptionally tough fabric the Holdon™ will tend to absorb the shock loading imposed by high wind. The larger
gripping area of the Holdon™ helps to spread the load.

Question – How many times can I re-use Holdons?

Answer - Holdons are made from a nylon/GRP polymer mix
which gives them great strength and plastic memory. Providing
the Holdon™ has not been put through long term repeated
extreme stressing, you can use them over and over again.
The best test is to fix one on some fabric and put the maximum manual loading you can on it. Their enduring gripping power is amazing.